Shopping Cart

Hydrowear Reversible Bodywarmer
Product code: LVSBFLPOR025
  • Colour Orange/ Grey
  • Size S
Hydrowear Reversible Bodywarmer
Product code: LVSBFLPOR025
  • Colour Orange/ Grey
  • Size S
Hydrowear Reversible Bodywarmer
Product code: LVSBFLPOR025
  • Colour Orange/ Grey
  • Size S
Hydrowear Reversible Bodywarmer
Product code: LVSBFLPOR025
  • Colour Orange/ Grey
  • Size S
Hydrowear Reversible Bodywarmer
Product code: LVSBFLPOR025
  • Colour Orange/ Grey
  • Size S

© 2022 Beeswift Limited

Gloves Cut Resistant

• 90% reinforced fiber + 10% PVC
• Medium weight fingerless latex dotted glove.
• Extra density blended yarn.
• Offers exceptional cut protection.
• Good dexterity and comfort to the user.
• Ideal to handle both large and small hazardous components.
• Dotted both sides.

• EN388: 2016
• Level 1 - Abrasion
• Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
• Level 4 - Tear Resistance
• Level X - Puncture
• Level B - ISO 13997 Cut Resistance

Kevlar Lightweight Glove
Product Code: KGLW

• 100% reinforced fiber
• Lightweight cut resistant glove.
• Exceptional dexterity for safe handling of the smallest components.
• Extremely successful used as a glove liner in conjunction with traditional
work gloves.
• Used this way it can provide additional protection should the outer glove
incur laceration.

• EN388: 2016
• Level 1 - Abrasion
• Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
• Level 4 - Tear Resistance
• Level X - Puncture
• Level A - ISO 13997 Cut Resistance

• 100% reinforced fiber
• Medium weight glove.
• Extra density yarn.
• High level cut protection without the loss of dexterity
• Comfortable for the wearer.
• Ideal where there is a requirement to handle both large and small
hazardous components.

• EN388: 2016
• Level 1 - Abrasion
• Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
• Level 4 - Tear Resistance
• Level X - Puncture
• Level B - ISO 13997 Cut Resistance

• 90% reinforced fiber + 10% PVC
• Medium weight glove.
• Extra density yarn.
• High level cut protection without the loss of dexterity
• Comfortable for the wearer.
• Ideal where there is a requirement to handle both large and small
hazardous components.

• EN388: 2016
• Level 1 - Abrasion
• Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
• Level 4 - Tear Resistance
• Level X - Puncture
• Level B - ISO 13997 Cut Resistance

• 20% reinforced fiber + 80% Latex
• Reinforced knitted glove fully latex coated.
• Excellent all-round protection.
• High cut resistance.
• Offers excellent grip.

• EN388: 2016
• Level 3 - Abrasion
• Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
• Level 4 - Tear Resistance
• Level 4 - Puncture
• Level D - ISO 13997 Cut Resistance

Kevlar Latex Gloves Large
Product Code: KLG

• 40% reinforced fiber + 60% Latex
• Reinforced knitted glove latex coated palm
• High cut resistancy.
• Comfortable, allows hand to breathe through back.
• Excellent grip.

• EN388: 2016
• Level 3 - Abrasion
• Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
• Level 4 - Tear Resistance
• Level 4 - Puncture
• Level D - ISO 13997 Cut Resistance

• Kutstop system
• Cut 3 amber cut protection
• 13g HPPE plus nylon liner
• Black nitrile coated palm
• Excellent dexterity and comfort
• Construction industry, automotive industry, electrical industry and handling materials with sharp edges
• Conforms to EN388:2003 - 4,3,4,2

• 14" (35cm) Reinforced sleeve with thumb slot.
• 100% reinforced fiber
• Excellent cut resistance.
• Soft and comfortable against the arm during use.
• Extremely lightweight elasticated style allows the sleeve to
remain in place during the most rigorous tasks.
•Thumb slot is added to further ensure that the product remains
in place.
• Ideal in industries where laceration risks to the arms are prominent.
• Sold as singles.

• EN388: 2016
• Level 1 - Abrasion
• Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
• Level 4 - Tear Resistance
• Level X - Puncture
• Level B - ISO 13997 Cut Resistance

• Kutstop system
• 15g HPPE plus glass fibre and spandex liner
• Black nitrile coated palm
• Excellent dexterity and comfort
• Ideal for the construction industry, automotive industry, electrical industry and handling glass or sheet metal

• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 4 - Tear Resistance
• Level 4 - Puncture
• Level C - ISO 13997 Cut Resistance

• 18" (45cm) Reinforced sleeve with thumb slot.
• 100% reinforced fiber
• Excellent cut resistance.
• Soft and comfortable against the arm during use.
• Extremely lightweight elasticated style allows the sleeve to
remain in place during the most rigorous tasks.
•Thumb slot is added to further ensure that the product remains
in place.
• Ideal in industries where laceration risks to the arms are prominent.
• Sold as singles.

• EN388: 2016
• Level 1 - Abrasion
• Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
• Level 4 - Tear Resistance
• Level X - Puncture
• Level B - ISO 13997 Cut Resistance

• Cut resistant Nylon/Spandex glove.
• Nitrile micro foam palm coating.
• Dexterity with comfort.

• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 4 - Tear Resistance
• Level 3 - Puncture
• Level B - ISO 13997 Cut Resistance

• High cut resistance.
• Nitrile micro foam palm coating.
• Dexterity with comfort.

• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 4 - Tear Resistance
• Level 3 - Puncture
• Level D - ISO 13997 Cut Resistance

Pu Coated Cut 5 Glove
Product Code: KSPU5

• 65% UHMWPE(Ultra high molecular weight polyethylene) + 35%PU
• Seamless liner.
• PU coating, palm coated.
• High quality cut resistance.
• Excellent dexterity.

• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance (Glove blunted the blade, ISO 13997 test required)
• Level 4 - Tear Resistance
• Level 3 - Puncture
• Level C - ISO 13997 Cut Resistance

• HPPE 40.9%, Nylon 14.1%, Polyester 15.9%, Glass Fibre 21.3%, Spandex 7.8% Liner.
• 100% Nitrile rubber coating.
• Ventilated back.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications

• EN 388:2016+A1:2018
• Level 4 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 2 - Puncture Resistance
• Level C - TDM Cut Resistance (ISO 13997)

• HPPE 47.4%, Polyester 20.1%, Glass Fibre 17.2%, Steel 14%, Spandex 1.3%.
• Food Safe and washable.
• Extremely high cut protection.
• Suitable for general food preparation and areas where high cut protection is needed.

• EN 388:2016+A1:2018
• Level 4 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 2 - Puncture Resistance
• Level F - TDM Cut Resistance (ISO 13997)

Glovezilla Hppe 18g Glove Cut E
Product Code: GZ112B

• 18 Gauge knit
• Grey PU palm coating
• UHMWPE liner
• Comfortable ergonomic fit

• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 4 - Tear Resistance
• Level 2 - Puncture
• Level E - ISO 13997 Cut Resistance

• Foodsafe (Except for fatty foods)

Glovezilla Hppe 18g Glove Cut F
Product Code: GZ113B

• 18 Gauge knit
• Grey nitrile palm coating
• HPPE liner
• Comfortable ergonomic fit

• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 4 - Tear Resistance
• Level 2 - Puncture
• Level F - ISO 13997 Cut Resistance

• Foodsafe (Except for fatty foods)

• 100% Para-Aramid Liner.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.

• EN 388:2016+A1:2018
• Level 1 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 2 - Tear Resistance
• Level 3 - Puncture Resistance
• Level B - TDM Cut Resistance (ISO 13997)

• EN ISO 11612: 2015
• A1 - Limited Flame Spread (Method A)
• F2 - Contact Heat (250C for between 10 to 15 Seconds)

Glovezilla Para-aramid Sleeve 10"
Product Code: GZ14Y10

• 100% Para-Aramid Liner.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.

• EN 388:2016+A1:2018
• Level 1 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 2 - Tear Resistance
• Level 3 - Puncture Resistance
• Level B - TDM Cut Resistance (ISO 13997)

• EN ISO 11612: 2015
• A1 - Limited Flame Spread (Method A)
• F2 - Contact Heat (250C for between 10 to 15 Seconds)

Glovezilla Para-aramid Sleeve 18"
Product Code: GZ15Y18

• 100% Para-Aramid Liner.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.

• EN 388:2016+A1:2018
• Level 1 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 2 - Tear Resistance
• Level 3 - Puncture Resistance
• Level B - TDM Cut Resistance (ISO 13997)

• EN ISO 11612: 2015
• A1 - Limited Flame Spread (Method A)
• F2 - Contact Heat (250C for between 10 to 15 Seconds)

• 100% Para-Aramid Liner.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.

• EN 388:2016+A1:2018
• Level 1 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 2 - Tear Resistance
• Level 3 - Puncture Resistance
• Level B - TDM Cut Resistance (ISO 13997)

• EN ISO 11612: 2015
• A1 - Limited Flame Spread (Method A)
• F2 - Contact Heat (250C for between 10 to 15 Seconds)

• 100% Para-Aramid Liner.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.

• EN 388:2016+A1:2018
• Level 1 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 2 - Tear Resistance
• Level 3 - Puncture Resistance
• Level B - TDM Cut Resistance (ISO 13997)

• EN ISO 11612: 2015
• A1 - Limited Flame Spread (Method A)
• F2 - Contact Heat (250C for between 10 to 15 Seconds)

• 13 Gauge Liner.
• 20% UHMW PE+ 80% rubber
• 100% TPE Fully Injection coating.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.

• EN 388:2016+A1:2018
• Level 3 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 2 - Puncture Resistance
• Level C - TDM Cut Resistance (ISO 13997)
• Level P - Impact Protection

• 13 Gauge Liner.
• 20% UHMW PE+ 80% rubber
• 100% TPE Fully Injection coating.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.

• EN 388:2016+A1:2018
• Level 3 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 2 - Puncture Resistance
• Level D - TDM Cut Resistance (ISO 13997)
• Level P - Impact Protection